Why replace your vacuum belt?

Over time the drive belt on your vacuum can stretch, crack, or break. A worn belt reduces brush-roll spin and weakens suction, causing poorer cleaning results. Replacing the belt regularly keeps your vacuum performing efficiently and prolongs the life of the motor and brush assembly.

Key Benefits

• High-quality rubber material for long-lasting wear resistance
• Flat belt style provides stable drive to the brush roll
• Sold as a 2-pack — handy to keep a spare on hand
• Quick, tool-free replacement in most cases

Compatibility

The E0205 belt is compatible with the following Eureka PowerSpeed models:

• NEU180 / NEU180B
• NEU182 / NEU182A / NEU182B
• NEU186
• NEU188

Package Includes

• 2 × E0205 rubber vacuum drive belts
• Package dimensions: 6.7 × 2 × 0.7 inches
• Weight: 0.81 ounces (total)

Recommended Replacement Interval

We recommend replacing the vacuum belt every 3 to 9 months depending on usage. If you notice reduced brush-roll movement, slipping, or visible cracks, replace the belt immediately.

Quick Installation Guide

1. Unplug the vacuum cleaner from power and tip it onto its back.
2. Remove the brush-roll cover (usually held by clips or screws) and slide out the brush roll.
3. If the old belt is broken, carefully remove it from the motor shaft and brush roll. Note the belt routing for reassembly.
4. Loop the new E0205 belt around the motor shaft, then stretch it over the brush roll (it should be snug).
5. Reinstall the brush roll and secure the cover. Test the brush roll by briefly powering on the vacuum.

Care & Maintenance Tips

• Clear hair and debris from the brush roll regularly to reduce belt strain.
• Avoid running the brush roll while the vacuum is stalled or jammed.
• Store spare belts in a cool, dry place away from direct sunlight to avoid premature degradation.

Product Specifications

Call to Action

Keep your Eureka PowerSpeed vacuum at peak performance — Buy the E0205 Replacement Belt (2-pack).