15PCS Drill Chuck Collet Set, Metal, Rotary Tool Accessory 0.02-0.13in
MadYiboshi 15PCS Drill Chuck Collet Set — Compact, Durable Rotary Tool Accessory
Overview
The 15PCS Drill Chuck Collet Set from MadYiboshi is a practical, heavy-duty accessory kit for rotary tools. Built from brass and alloy, this kit includes a 3-jaw chuck that holds shanks from 1/32" to 1/8" and 10 precision brass collets (0.02–0.13 in). It’s designed for hobbyists and professionals who use Dremel-style rotary tools for woodworking, engraving, manicure/pet trimming, grinding and other DIY tasks.
Check compatibility & buyWhy this set stands out
- Complete kit: 3-jaw chuck, 10 brass collets, wrench, L-shaped wrench and two silver nuts — everything you need to swap bits quickly.
- Durable materials: Brass collets and alloy chuck deliver high hardness, wear resistance and reliable torque handling.
- Anti-slip chuck design: Textured 3-jaw chuck gives a secure grip on small shanks during high-speed rotation.
- Wide application: Compatible with most Dremel-style rotary tools for engraving, carving, polishing, and light drilling work.
Technical specifications
How to use the kit (quick guide)
- Select the brass collet that matches your bit’s shank diameter.
- Insert the collet into the 3-jaw chuck; make sure it seats fully.
- Insert the bit and tighten the chuck with the supplied wrench or L-wrench until secure — avoid overtightening.
- Verify alignment at low speed before using the rotary tool at full speed.
Pro tip: For precise engraving or micro-drilling, pick the smallest collet that firmly grips your bit to reduce wobble.
Who should buy this set?
This kit is ideal for:
- Hobbyists and makers who frequently swap micro-bits.
- Woodworkers doing fine-detail carving.
- DIYers upgrading their rotary tool accessory range on a budget.
- Pet groomers and at-home manicure users working with small rotary attachments (use with care).
The 15PCS set is designed to be compatible with most Dremel-style rotary tools that accept 1/32"–1/8" shanks and a #9/32-40 threaded chuck. Before purchasing, check your tool’s manual for chuck thread size and maximum shank diameter to ensure fit.
Frequently asked questions
- Can the brass collets handle high RPMs?
- Yes — brass collets and an alloy chuck are suitable for typical rotary tool speeds, but always inspect collets for wear and avoid exceeding your tool’s recommended speed for small bits.
- Will this fit my Dremel 4000 / 3000?
- Most Dremel tools accept 1/32"–1/8" bits and are compatible with third-party chucks. Verify the chuck thread (#9/32-40) on your specific model before ordering.
- How do I avoid slippage?
- Use the collet that exactly matches the bit shank, tighten the chuck securely with the supplied wrench, and test at low speed before full operation.
Where to buy & final thoughts
The MadYiboshi 15PCS Drill Chuck Collet Set is an affordable, compact upgrade for anyone who uses micro-bits with a rotary tool. It’s a good balance of durability and versatility for hobby and light-professional work. If you need precision, portability, and a full complement of collets, this kit is worth considering.
