Premium Replacement Vacuum Belts for Bissell Style 7 9 10 12 14 16 | Replaces Pa
Premium Replacement Vacuum Belts for Bissell Style 7–16
Restore brush-roll performance and suction with heavy-duty replacement belts engineered to replace part numbers 3031120, 32074, and 203-1093. Fits Style 7, 9, 10, 12, 14, 16 and many popular Bissell series.
Shop Replacement Belts
Overview
If your Bissell upright vacuum has reduced agitation or the brush roll isn’t spinning properly, a worn or broken belt is the most common cause. These premium replacement belts are made from durable rubber designed to resist cracking and maintain traction so your brush roll turns at the right speed for deep cleaning carpets and bare floors.
Compatibility & Replacement Part Numbers
Direct replacement for the following part numbers and styles:
- Replaces: 3031120, 32074, 203-1093
- Compatible styles: Style 7, Style 9, Style 10, Style 12, Style 14, Style 16
- Works with Bissell series: PowerForce, PowerForce Turbo, CleanView, CleanView Helix, PowerGlide, Velocity, Momentum, Rewind SmartClean, Pet Hair Eraser and similar upright models.
Key Features & Benefits
- Durable rubber construction for long life and resistance to cracking.
- Restores cleaning power by ensuring the brush roll spins at optimal speed to agitate carpet fibers.
- Easy DIY installation — quick swap to get your vacuum back in service with minimal tools.
- Cost-effective maintenance part that helps extend the service life of your vacuum when replaced regularly.
Specifications
| Material | High-quality rubber |
|---|---|
| Replaces | Part Nos. 3031120, 32074, 203-1093 |
| Compatible Styles | Style 7, 9, 10, 12, 14, 16 |
| Series | PowerForce, CleanView, PowerGlide, Velocity, Momentum, Pet Hair Eraser, Rewind SmartClean |
How to Replace Your Bissell Vacuum Belt (Quick DIY)
Always unplug the vacuum before performing maintenance.
- Turn the vacuum over and remove the brush-roll access plate (usually secured with clips or screws).
- Slide out the brush roll and inspect it for hair/tangles — clean before reassembly.
- Remove the old, stretched or broken belt from the motor shaft and brush roll.
- Loop the new belt over the motor shaft and stretch it onto the brush roll. Ensure it sits in the belt groove snugly.
- Reinstall the brush roll, secure the access plate, and return the vacuum to upright position.
- Plug in and test: the brush roll should spin smoothly without slipping or unusual noise.
If your brush roll still doesn’t spin after replacing the belt, check the motor coupling and belt alignment, or consult a qualified technician.
Maintenance Tips for Peak Performance
- Replace the belt every 6–12 months, or more often (3–4 times/year) with heavy use.
- Keep the brush roll clean of hair and fibers — a clogged roller increases strain on the belt and motor.
- Inspect belts for glazing, cracks, or stretching and replace immediately if damaged.
- Store replacement belts in a cool, dry place away from direct sunlight to preserve rubber elasticity.
Frequently Asked Questions
- Will this belt fit my Bissell model?
- These belts are compatible with many popular Bissell upright models (see Compatibility section). If your model uses part number 3031120, 32074, or 203-1093, this belt is a direct fit. When in doubt, check your vacuum’s user manual or the sticker on the vacuum base for the part number.
- How do I know when to replace the belt?
- Signs include a brush roll that won’t spin, slipping while vacuuming, unusual noise, or visible cracking/stretching of the belt.
- Can I install the belt myself?
- Yes — installation is straightforward and outlined above. Always unplug the unit before starting. If you don’t feel comfortable, contact a service center.
- Do you sell the brush roll or bearings too?
- Some vendors offer full maintenance kits (belt + brush roll + bearings). Check the product page for kit options or compatible parts.
SEO & Content Notes (for store owners)
Suggested primary keywords: Bissell replacement belt, 3031120 replacement belt, Bissell Style 7 belt. Suggested secondary keywords: vacuum belt replacement, CleanView belt, PowerForce belt. Use product-specific images with descriptive file names and alt text (example: bissell-3031120-replacement-belt.jpg, alt="Replacement belt for Bissell 3031120").
Buy or Learn More
Get back to deep cleaning today — replace worn belts to restore performance and protect your vacuum motor. Add replacement belt to cart
