Adhesive Thin Metal Plates for Magnetic Phone Mounts, 4-Piece S-07N Black
Adhesive Thin Metal Plates for Magnetic Phone Mounts — 4-Piece S-07N Black
Ultra-thin adhesive metal plates with industrial 3M VHB tape — converts any phone or tablet into a magnetic-mount-ready device. Includes rectangular and circular plate shapes for flexible mounting options.
The S-07N Black 4-piece kit is designed for everyday drivers and professionals who want a clean, reliable magnetic mounting solution. Thin enough to sit inside a phone case yet strong enough for steady holding during driving and daily use.
Buy nowKey Features & Specifications
- Universal Compatibility: Works with all major magnetic car holders and mounts.
- Strong 3M VHB Adhesive: Industrial-grade VHB tape for a secure, long-lasting bond that resists extreme heat and cold.
- Ultra-Thin Design: Minimal bulk — fits inside or outside most phone cases without interfering with wireless charging in many setups.
- Multiple Shapes Included: Rectangular plates for larger devices and circular plates for small phones or low-visibility mounting.
- Durable Metal Construction: High-quality metal/steel for reliable magnetic attraction and long service life.
| Specification | Details |
|---|---|
| Kit Contents | 2 × Rectangular plates, 2 × Circular plates (4 pieces total) |
| Adhesive | 3M VHB industrial adhesive (pre-applied) |
| Color | Matte Black |
| Material | Magnetic steel / metal plate |
| Thickness | Ultra-thin — designed to be phone-case friendly |
| Compatibility | iPhone, Samsung Galaxy, Google Pixel, other smartphones & small tablets |
Why choose S-07N adhesive metal plates?
Magnetic mounts are only as reliable as the plate that connects your device to the magnet. The S-07N plates combine industrial strength adhesive, slim profile, and durable metal construction so you get a secure mount without the weight or bulk. Whether you're navigating, streaming music, or taking hands-free calls, these plates make daily driving safer and simpler.
How to install (quick 3-step guide)
- Clean the surface: Wipe the back of your phone or the outside of your case with isopropyl alcohol and let it dry.
- Peel & place: Remove the protective film from the adhesive, position the plate where you want magnetic contact, and press firmly for 10–15 seconds.
- Set cure time: Allow 24 hours for the adhesive to reach full bond strength before subjecting to heavy use or high-vibration situations.
Tip: For wireless charging, try placing the plate off-center or inside the case so it does not interfere with the charging coil.
Best use cases
- Car dashboards and vent mounts — quick access to navigation and hands-free calls.
- Home and office — magnetic mounting on desks, refrigerators, or workbenches for easy viewing.
- Multiple devices — keep spares for tablets, family phones, or shared work devices.
Pros & Cons
- Strong, weather-resistant 3M VHB adhesive
- Ultra-thin — minimal bulk with or without a case
- Multiple shapes for versatile mounting
- Durable metal construction for long-lasting magnetic hold
- May need careful placement to avoid wireless charging interference
- Permanent adhesive — removal may require heat and careful peeling to avoid residue
Frequently Asked Questions (FAQ)
- Will the plate damage my phone?
- No — the plate itself is metal with adhesive. Use the included adhesive only on cases or where intended; if applied directly to a phone finish, take care when removing. Test the plate on a case first if you're concerned.
- Will it work with all magnetic mounts?
- Yes — the plate is compatible with standard magnetic car holders and magnetic desk mounts. Performance depends on the mount strength and plate placement.
- Does it affect wireless charging?
- It can. Many wireless chargers rely on coil alignment; placing a metal plate directly over the coil may prevent charging. To avoid interference, place the plate off-center or inside a case so it does not sit between the charger and device.
- How do I remove adhesive residue?
- Gently warm the adhesive with a hairdryer, peel slowly, and clean residue with isopropyl alcohol or an adhesive remover approved for electronics/cases.
Final thoughts
The 4-piece S-07N Black adhesive metal plate kit is a practical, low-cost way to convert phones and tablets for magnetic mounting. With strong 3M VHB adhesive and an ultra-thin profile, these plates strike a useful balance between hold strength and discreet appearance — ideal for drivers, home offices, and anyone who wants the convenience of magnetic mounting without bulk.
