2PCS Front Windshield Washer Nozzle with Washers,Adjustable Fan Shape Spray
IHOTDER 2PCS Front Windshield Washer Nozzle — Adjustable Fan Shape Spray
Quick Overview
The IHOTDER universal windshield washer nozzle set (2PCS) replaces worn or inefficient dual-jet nozzles with a single adjustable fan-spray design that covers more glass using less washer fluid. Each kit includes two nozzles and all mounting hardware (nuts, washers and gaskets) for a secure, leak-free fit.
Find Availability & BuyWhy Choose This Nozzle?
- Universal Compatibility: Designed to fit any nozzle mounting point with holes ≥ 8 mm. Full hardware included for a secure fit.
- Upgraded Fan Spray: Produces a wide, even fan-shaped spray for better windshield coverage while using less washer fluid than traditional dual-jet nozzles.
- Durable Construction: Molded from premium nylon for long life and smooth operation — weather-resistant and built for repeated use.
- Easy DIY Replacement: Simple swap-in installation — remove the original nozzle and insert the new one. No mechanic required.
- Adjustable: Height and spray angle are adjustable with a flat screwdriver so you can precisely aim the spray pattern.
Technical Specifications
| Spec | Details |
|---|---|
| Material | Plastic (Nylon) |
| Brand | IHOTDER |
| Item dimensions | 1.26 × 1.06 × 0.62 inches |
| Exterior finish | Nylon |
| Inlet connection type | Press |
| Number of ports | 1 |
| Mounting hole requirement | Holes ≥ 8 mm |
| Package contents | 2 nozzles, nuts, washers, gaskets |
| Manufacturer | ihotder |
Installation — Simple DIY Steps
- Park the vehicle on level ground and switch the ignition off.
- Locate the existing washer nozzle on the hood or cowl. Use a flat screwdriver or trim tool to gently pry out the old nozzle (if required).
- Clean the mounting hole area and ensure no debris or gasket residue remains.
- Insert the IHOTDER nozzle into the mounting hole (holes must be ≥ 8 mm). Use included gaskets and washers for a snug seal.
- Secure the nozzle using the supplied nut from beneath the hood. Tighten until firm but avoid over-torquing plastic parts.
- Adjust the spray angle and height with a flat screwdriver by gently turning the top of the nozzle until the fan spray covers the desired windshield area.
- Test the washers with the ignition on and adjust again if necessary.
Tip: If your washer fluid output is weak after install, check for clogs in the hose or clean the nozzle with a pin before replacing it.
FAQ
- Will this fit my car?
- These nozzles are universal and fit most vehicles that have nozzle mounting holes of at least 8 mm in diameter. Check your vehicle's nozzle mounting hole size before purchase.
- Can I adjust the direction of the spray?
- Yes — both height and spray angle are adjustable with a flat screwdriver to fine-tune coverage.
- Are replacement parts included?
- Each package includes 2 nozzles plus nuts, washers and gaskets required for standard installations.
- Is the material weather resistant?
- Yes — the nozzles are molded from premium nylon designed to resist weathering and repeated use.
Bottom Line
The IHOTDER 2PCS adjustable fan-shaped washer nozzles are a cost-effective, easy-to-install upgrade for faded or inefficient factory nozzles. They deliver broader coverage using less fluid, install in minutes, and include full mounting hardware for a reliable fit.
Short description for search engines: IHOTDER universal windshield nozzle — adjustable fan spray nozzle that fits most cars (mounting hole ≥ 8mm). Durable nylon construction, low fluid consumption, and easy DIY installation. Package includes 2 nozzles and full mounting hardware.
Check Price & Buy Now
