Mineral Oil Brake Fluid 300ML for Shimano Tektro TRP Hydraulic Disc Brakes
Mineral Oil Brake Fluid 300ML — Perfect for Shimano, Tektro & TRP Hydraulic Disc Brakes
A premium 300ML pack (2 x 150ML) of mineral oil brake fluid engineered for reliable braking, wide temperature tolerance and extended component life.
Product Overview
This high-performance mineral oil brake fluid is specifically formulated for bicycle hydraulic disc brake systems. Supplied as a cost-effective twin pack (two 150ML bottles = 300ML total), it’s ideal for routine maintenance, bleed kits, and workshop service.
Technical Specifications
| Material Type | Mineral Oil |
|---|---|
| Total Volume | 300 Milliliters (2 x 150ML bottles) |
| Item Weight | 0.36 Kilograms |
| Package Dimensions | 8.82 x 6.02 x 1.93 inches |
| Manufacturer | Shanxi Chanso Technology Co., Ltd. |
| Part Number | CS-SMN300 |
| UPC | 715748021483 |
Brake Compatibility
Designed for all mineral oil-based hydraulic brake systems, including (but not limited to):
- Shimano series hydraulic disc brakes
- Tektro series hydraulic disc brakes
- TRP series hydraulic disc brakes
- Other mineral oil-based hydraulic brake systems
Performance Features
- Excellent low temperature performance — flows normally in extreme cold conditions down to -52°C.
- Superior high temperature performance — maintains stable braking under demanding conditions.
- High wet and dry boiling points — reduced fade and consistent lever feel.
- Stable viscosity across a wide temperature range for predictable modulation.
- Corrosion protection — helps extend the life of pistons, seals and calipers.
- All-weather reliability for wet or dry riding conditions.
How to Use & Maintenance Tips
Follow manufacturer guidelines when bleeding or topping up hydraulic brakes. General tips:
- Always use clean tools and a dedicated bleed kit to avoid contamination.
- Replace mineral oil if brake feel becomes spongy or after heavy use for an extended period.
- Store bottles tightly capped in a cool, dry place away from direct sunlight.
- Do not mix mineral oil with DOT fluids — they are chemically incompatible and will damage seals.
FAQ
- Can I use this fluid in DOT systems?
- No — DOT fluids are glycol-based and incompatible with mineral oil systems. Mixing will damage components.
- How often should I bleed my brakes?
- Bleed frequency depends on riding conditions and use. A good rule is: as needed when lever feel degrades, or at least once per year for regular riders.
- Is one 300ML pack enough?
- For most road and mountain bike bleeds, a 300ML twin pack is sufficient for several bleed jobs (typically 2–4 full bleeds depending on system size and waste).
