Key Features

• Complete 25-piece set: M6-1.0 bolts in 40mm, 50mm, 60mm, 70mm and 80mm lengths (5 pieces each) plus 25 × M6 × 10mm cross-dowel barrel nuts.
• High-quality materials: Carbon steel with zinc plating — durable, tough and rust-resistant for nursery furniture and bunk beds.
• Easy installation: Socket head bolts and cross dowel barrel nuts make assembly secure and straightforward.
• Designed for common crib brands: Useful for Dream On Me, Delta, Graco and many other child-safety furniture assemblies (see compatibility notes below).
• Manufacturer & support: Manufactured by cSeao; committed to customer service and warranty support.

Technical Specifications

Note: This kit contains five commonly used bolt lengths and barrel nuts, but it is not guaranteed to fit every crib model. Always verify the bolt length and thread size for your specific crib before installation to avoid returns.

Installation Tips & Best Practices

1. Confirm thread size: ensure your crib or furniture uses M6 × 1.0 threads. Using an incorrect thread can damage components.
2. Measure bolt length: measure the existing fastener or the depth of the threaded receiver. When in doubt, choose the shorter length to avoid protrusion into sleeping areas.
3. Use the barrel nut correctly: insert the cross-dowel (barrel nut) into the mattress-slat or headboard receiver and align the internal hole perpendicular to the bolt. Tighten gradually and evenly—do not overtighten.
4. Torque & safety: hand-start all bolts, then torque with an appropriate socket to a snug fit. Do not exceed recommended torque for the crib frame—overtightening can strip threads or deform wood.
5. Check alignment: after assembly, inspect for gaps, loose connections, or protruding fasteners. Re-check after 24 hours of use and periodically thereafter.

Compatibility & What to Check Before Buying

This kit is useful for many Dream On Me, Delta, Graco and other common crib and furniture assemblies because it includes standard M6 metric bolts and matching cross dowel barrel nuts. However:

• Confirm your crib uses M6 × 1.0 thread (metric) — some cribs use imperial fasteners or different metric sizes.
• Measure the required bolt length from the head to the end that will enter the barrel nut or receiver. This kit covers 40–80mm lengths.
• If your crib uses specialized or proprietary hardware (safety brackets, rivets, or carriage bolts), this kit may not be applicable.

Warranty, Service & Safety

Manufacturer: cSeao. The product listing indicates the manufacturer is committed to customer service. If you experience issues with fit or function, contact the seller or manufacturer for support and warranty guidance. Always follow the crib manufacturer's instructions and safety guidelines when replacing hardware. Using incorrect hardware can compromise crib safety.