Windshield Washer Hose Kit Includes 13.12Ft Wiper Hose + 12 Connectors, Rubbe
Windshield Washer Hose Kit: 13.12ft Rubber Hose + 12 Connectors — Quick DIY Replacement
Why this washer hose kit matters
Clear, unobstructed vision is one of the most important safety features while driving. A leaking or brittle washer hose prevents your washer pump from delivering cleaning fluid to the windshield, increasing risk in rain, bugs, or road grime. This 13.12ft windshield washer hose kit gives you enough premium rubber hose and connector types to repair most vehicles quickly — saving you time and money versus a shop repair.
What’s included
- 13.12 ft (157.5 in) clear rubber washer hose — outer diameter 6.8mm, inner diameter 4.3mm
- 12 connectors — 4x T-type, 4x Y-type, 4x I-type (barbed design for secure, non-slip connection)
| Hose length | 13.12 ft (157.5 in) |
| Outer diameter | 6.8 mm |
| Inner diameter | 4.3 mm |
| Connectors | 4x T, 4x Y, 4x I (barbed) |
| Material | Premium rubber — soft, flexible, thickened design |
| Compatibility | Universal fit for most cars, trucks, RVs |
Key benefits
- Durable premium rubber: Resistant to aging and cracking, designed for long service life.
- Universal & flexible: Works with most windshield washer nozzles on cars, trucks and RVs.
- Easy DIY repair: Hose can be cut to length and barbed connectors provide secure, leak-resistant joins.
- Saves time & money: No trip to the repair shop required — a fast, low-cost fix you can do at home.
Quick installation guide (DIY)
- Park the vehicle on a level surface and switch off the ignition. If needed, raise the hood for better access.
- Locate the washer pump and follow the existing hose to find the damaged section. If the hose is under the fender or along the frame, you may need to remove clips or panels.
- Cut out the damaged portion using scissors or a hose cutter. Measure and cut the replacement hose to length (allow a small extra length for routing).
- Select the connector type you need (T, Y, or I). Push the hose fully onto the barbed connector until seated. Secure with a small clamp if desired for extra protection.
- Reconnect the hose to the washer pump and the nozzles. Test the washer pump to confirm spray and check for leaks.
- If routing under the car or through panels, secure the hose with zip ties and reattach any removed clips or trim.
Tip: Use a clamp or small zip tie on barbed connections in high-pressure or high-heat areas for extra peace of mind.
Troubleshooting & common issues
- No spray after installation: Check the washer pump fuse and ensure the pump is running. Verify the hose is not kinked and all connectors are seated.
- Leaks at connector: Push the hose further onto the barb and use a micro clamp or zip tie. Re-cut the hose end squarely for a better seal.
- Poor spray pattern: Inspect nozzles for blockages (dirt, wax). Clear with a thin wire or compressed air.
Who should buy this kit?
This kit is ideal for drivers who want to perform a simple, cost-effective repair at home: DIYers, fleet managers, and vehicle owners who want to avoid the time and labor cost of a shop. Because the hose is universal and comes with multiple connector types, it’s also a great maintenance kit to keep in a roadside toolbox.
FAQs
- Is the hose compatible with my car?
- Yes — the hose is a universal size (6.8mm OD / 4.3mm ID) that fits the majority of windshield washer systems. Check your existing hose diameter if you’re unsure.
- Can I cut the hose to length?
- Absolutely — the hose is designed to be trimmed with scissors or a hose cutter for a custom fit.
- Do I need special tools?
- No special tools required. A cutter or scissors, and optional small clamps or zip ties, are usually sufficient.
- Will connectors stay in place?
- Yes — connectors feature a barbed design to prevent dislodging. For extra security you can add a micro clamp or zip tie.
Conclusion — smart, simple windshield maintenance
If your washer system has weak or no spray because of brittle or cracked hoses, this 13.12ft windshield washer hose kit is an inexpensive, reliable fix. The premium rubber construction and the included T, Y, and I connectors make it flexible for most vehicles — letting you repair the system quickly and safely without a trip to the shop.
